YH-WPD-005
category:
Lighting engineering lamps
Outdoor lighting fitting
Christmas lights
Light strip and light bar
Key words:
Hotline：
YH-WPD-005
|
Product Specifications |
|
|
Model |
YH-WPD005 |
|
Power |
6*1W |
|
Lifetime |
50,000 hours |
|
Light source |
Default wafer chip (other customizable: Preh, CREE, OSRAM, Philips, etc.) |
|
Number of LEDs |
6 |
|
Single power |
1W |
|
LED color |
RGB，RGBW，R G B W Y |
|
Color Effects |
Chasing, flowing water, 256-level grayscale, full color, monochrome |
| beam Corner | 8° ;, 15°, 20°, 30°, 45°, 60°, 90°; |
| LED Drive method | 300mA Constant current drive; |
| protection Grade | IP65 |
| safe Grade | DC24V Class III |
| Power Line | AC220V 3*1.0mm² cable |
| Signal Line | 4 *0.75 mm² male and female connector |
| Control method | DMX512 Control |
| environment Temperature | - 25—45° |
| Product Size | See Drawings |
| outside Material | high Precision aviation aluminum + tempered glass |
| Luminous flux | 100 -120LM/W |
| work Temperature | - 20- +60° |
| Driver Way | built-in High power constant current power supply |
| Can it be dimmed | Stand Adjustment |
| Outline Way | bottom Outlet (stainless steel waterproof screw) |
| fit Location | outdoor Building advertising, highway bridges, garden landscape places |
►Pre-installation considerations
Open the package, check the product carefully, please handle with care;< /p>
If you find any damage to the product, please keep the product packaging and report it to the customer in time;
Please do not try damaged products;
The installation of the product must be performed by a licensed professional electrician;
Non-professionals, please do not dismantle or repair the The product is given replacement or warranty service.
►Installation steps
Please disconnect the power before installation, and it is strictly forbidden to operate with power during installation;
Open two holes where the Screw on;
Adjust the angle of the light body according to the light angle of the object to be illuminated, and fix the light body ;
Wiring, connect the brown wire left on the side of the lamp to the positive pole of the power supply, and the blue wire to the positive pole of the power supply Negative power supply
After confirming that the connection is correct, turn on the power and the lamp can work normally。
►Tips
In order to ensure the normal operation of the product, please use the voltage within the voltage range of the lamp label;
Please follow the correct installation steps to install the product;
When installing or disassembling the product, please disconnect the power supply of the lamp to avoid the risk of leakage.
►Troubleshooting
If it is not due to improper operation, please confirm whether it is caused by the following reasons. If the problem cannot be solved, please stop using it and contact a qualified electrician or contact the manufacturer directly;
A: The lamp does not work after turning on the power?
Disconnect the power supply, please check whether the power cord of the lamp is in good connection with the power supply (or mains) and whether the power supply is good ;
B: The light is still not working with good wiring?
Please have a qualified electrician check whether the supply voltage of the lamp is lower than the rated voltage of the lamp itself.
►Maintenance Notes
Be sure to turn off the power before cleaning the lamp;
Please do not use cosmetic or corrosive items for cleaning.
RELATED PRODUCTS
MP-260 (Lighting cloud conduction intelligent controller)
YH-SXD-002 (high power underwater light)
ONLINE MESSAGE
Copyright@Zhongshan Yuhong Lighting Technology Co. Ltd.