LED Wall Light (Customized)
category:
Products
Key words:

Hotline:
LED Wall Light (Customized)
LED outdoor wall lamp series: It adopts the principle of conduction and convection heat dissipation, and is a new type of green and environmentally friendly lamp manufactured in accordance with GB7000.5-2005 "Safety Requirements for Road and Street Lighting Lamps". Reasonable structure, beautiful appearance, moisture and heat resistance, good sealing performance. High luminous efficiency, vivid vision, no flicker, no harm to eyes and skin, safe to use. The new LED light source is selected and equipped with a specially designed light distribution system. The light source can be used continuously for 50,000 hours. Under the same illumination, it is more energy-saving and power-saving than high-voltage nano-street lamps and more power-saving than incandescent lamps. Modular integrated design, can be arbitrarily combined into products with different power and brightness; and each module is an independent light source individual, independent power supply individual, to ensure safe use. Flexible and convenient installation, environmental protection, energy saving, no pollution, and high stability. It has high stability in use and realizes green lighting in the true sense.
► Precautions before installation
Open the package, check the product carefully, please handle it with care;
If you find any damage to the product, please keep the product packaging and report it to the customer in a timely manner;
Please do not attempt to use damaged products;
The installation of the product must be performed by a licensed professional electrician;
Non-professionals, please do not dismantle and repair, our company has the right to refuse to provide replacement or warranty services for dismantled and repaired products.
►Installation steps
Please disconnect the power supply before installation. During the installation process, live operation is strictly prohibited;
Open two holes with the same size as the screw holes on the physical product bracket at the place to be installed, and install the screws;
Adjust the angle of the light body according to the light angle of the object to be illuminated, and fix the light body;
Wiring, connect the brown wire left on the side of the lamp to the positive pole of the power supply, and the blue wire to the negative pole of the power supply
After confirming that the connection is correct, turn on the power and the lamp can work normally.
►Tips
In order to ensure the normal operation of the product, please use the voltage within the voltage range of the lamp label;
Please follow the correct installation steps to install the product;
When installing and disassembling the product, please disconnect the power supply of the lamp to avoid the risk of leakage.
► Troubleshooting
If it is not due to improper operation, please confirm whether it is caused by the following reasons. If the problem cannot be solved by taking the indicated method, please stop using it and contact a qualified electrician or directly contact the manufacturer;
A: After the power is turned on, the lamp does not emit light and works?
Disconnect the power supply Please check whether the power cord of the lamp is in good connection with the power supply (or mains), and whether the power supply is in good condition;
B: The lamp is still not emitting light with good wiring?
Ask a qualified electrician to check whether the supply voltage of the lamp is lower than the rated voltage of the lamp itself.
►Maintenance Precautions
Before cleaning the lamps, be sure to turn off the power;
Please do not use cosmetic items or corrosive things for cleaning.
RELATED PRODUCTS
undefined
ONLINE MESSAGE
Copyright@Zhongshan Yuhong Lighting Technology Co. Ltd.